Sharp MX-3110N Cautions, Power notes, Fax Specifications, Network Printer Specifications, Do Not

CAUTIONS

Symbols in this manual

To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual.

WARNING	CAUTION
Indicates a risk of death or serious injury.	Indicates a risk of human injury or property damage.

	CAUTION!	PINCH POINT	PROHIBITED	DO NOT	MANDATORY
Meaning of the symbols
	HOT	KEEP CLEAR	ACTIONS	DISASSEMBLE	ACTIONS

Power notes

WARNING

Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Also make certain the outlet is properly grounded. Do not use an extension cord or adapter to connect other devices to the power outlet used by the machine. Using an improper power supply may cause fire or electrical shock.

*For the power supply requirements, see the name plate in the lower left corner of the left side of the machine.

Do not damage or modify the power cord.

Placing heavy objects on the power cord, pulling it, or forcibly bending it will damage the cord, resulting in fire or electrical shock.

Do not insert or remove the power plug with wet hands.

This may cause electrical shock.

CAUTION

When removing the power plug from the outlet, do not pull on the cord.

Pulling on the cord may cause damage such as wire exposure and breakage, and may result in fire or electrical shock.

If you will not use the machine for a long time, be sure to remove the power plug from the outlet for safety.

When moving the machine, switch off the main power and remove the power plug from the outlet before moving.

The cord may be damaged, creating a risk of fire or electrical shock.

8

Fax Specifications

Name	Facsimile expansion kit (MX-FX11)
Useable lines	General phone lines (PSTN), private branch exchange (PBX)
	Normal characters:	8 dot/mm × 3.85 chars/mm
Scanning line density	Small characters:	8 dot/mm × 7.7 line/mm
	Fine characters:	8 dot/mm × 15.4 line/mm
	High-definition:	16 dot/mm × 15.4 line/mm
Connection speed	Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method	MH, MR, MMR, JBIG
Connection mode	Super G3 / G3
Original paper sizes for transmission	A3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. length of
	1,000 mm* can be transmitted (one-sided and B/W only).)
Registered paper size	A3 (11" × 17") to A5 (5-1/2" × 8-1/2")

Network Printer Specifications

Type	Built-in type
Continuous print speed	Same as continuous copy speed
Resolution	Data processing: 600 × 600 dpi, 1,200 × 1,200 dpi
	Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi, 1,200 × 1,200 dpi
Page description language	Standard: PCL6 emulation, PS3 emulation *1
Compatible protocols	TCP/IP, IPv4/IPv6, IPX/SPX, NetBEUI, IPP, EtherTalk *1
	Windows 2000, Windows XP, Windows 2000 Server, Windows Server 2003,
Compatible OS	Windows Vista, Windows Server 2008, Windows 7
	Macintosh (Mac OS 9.0 ~ 9.2.2, OS X 10.2.8, 10.3.9, 10.4 ~ 10.4.11, 10.5 ~
	10.5.8, 10.6 ~ 10.6.2)*1

	Approx. 2 seconds *1 (A4 (8-1/2" × 11") Sharp standard paper, normal
Transmission time	characters, Super G3 (JBIG))
	Approx. 6 seconds (G3 ECM)
Memory	1 GB
	Touch dial memory	Max. of 2,000 entries (Including group dialling for fax,
Notes		scanner, and Internet fax)
	Entries per group	Max. of 500 entries
	Mass transmissions	Max. of 500 recipients

*1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the International Telecommunications Union (ITU-T). This is the speed for when sending an A4 (8-1/2" × 11") size piece of paper of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed mode (33.6 kbps). This is the transmission speed for image information only and does not include time for transmission control. The actual time needed for a transmission depends on the content of the text, type of receiving fax machine, and telephone line conditions.

Internal fonts (options)	80 fonts for PCL, 136 fonts for PS3 emulation
Memory	Machine system memory and hard disk
Interface	10BASE-T/100BASE-TX/1000BASE-T, USB 1.1, USB 2.0 (high speed mode)

*1: When equipped with a PS extension kit (MX-PK11).

21