Sharp MX-3110N Basic Specifications / Copier specifications, Laser information, „„ Caution

SPECIFICATIONS

Basic Specifications / Copier specifications

Name	MX-2610N/MX-3110N/MX-3610N
Type	Desktop
Colour	Full colour
Copier system	Laser electrostatic copier
Scanning	Scan (B/W): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi
	Scan (full colour): 600 × 600 dpi
resolution
	Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation	Scan: equivalent to 256 levels / Print: equivalent to 256 levels
Original paper	Max. A3 (11" x 17”) for sheets and bound documents
sizes
	A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency film, Heavy paper, Envelopes
	Tray 1-4: A3, B4, A4, A4R, B5, B5R, A5R, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-1/2", 8-1/2" × 13-2/5",
	8-1/2" × 13", 8-1/2" × 11", 8-1/2" × 11"R, 7-1/4 × 10-1/2"R, 5-1/2" × 8-1/2"R
	Multi-bypass tray: A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency film, Heavy paper,
Copy sizes	Envelopes
	Lost margin (leading edge): 4 mm (11/64") ± 1 mm (± 3/64")
	Lost margin: (trailing edge): 2 mm (6/64") - 5 mm (- 13/64")
	Leading edge / trailing edge: total 8 mm (21/64") or less
	Near edge / far edge: total 4 mm (11/64") ± 2 mm (± 6/64") or less
Warm-up time	20 seconds or less
	 This may vary depending on the ambient conditions.
		MX-2610N	MX-3110N	MX-3610N
First-copy time	Full colour:	8.1 seconds	7.9 seconds	6.8 seconds
	B/W:	5.9 seconds	5.8 seconds	5.2 seconds

This may vary depending on the state of the machine.

			MX-2610N	MX-3110N	MX-3610N
Continuous	A4, 8-1/2" × 11"	B5, 7-1/4" × 10-1/2"	26 copies/min.	31 copies/min.	36 copies/min.
	A4R, 8-1/2" × 11"R	B5R, 7-1/4" × 10-1/2"R	19 copies/min.	20 copies/min.	23 copies/min.
copying speeds*
	B4, 8-1/2" × 14"		16 copies/min.	17 copies/min.	20 copies/min.
(when shifter is
	A3, 11" × 17"		14 copies/min.	15 copies/min.	17 copies/min.
not in operation)
	* Continuous speed for same original source. Output may be

temporarily interrupted to stabilize image quality.

Copy ratios

Paper feed / capacity

Max. paper feed / max. capacity

Continuous copy

Memory

Operating

Ambientenvironment

environment Standard environment

Required power supply

Dimensions

Weight

With multi-bypass tray extended

Overall dimensions

With right side exit tray extended

Same size: 1:1 ± 0.8 % Enlarge: 115 %, 122 %, 141 %, 200 %, 400 % Reduce: 25 %, 50 %, 70 %, 81 %, 86 %

Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 % increments, total 376 increments. Can calculate zoom rate when mm is specified.

500 sheets in one tray plus 100-sheet multi-bypass tray

Using 80 g/m2 (21 lbs.) weight paper

5,600 sheets in 4 trays (500 × 4) plus 100-sheet multi-bypass tray plus 3,500 sheets in large capacity tray

 Using 80 g/m2 (21 lbs.) weight paper
Max. 999 copies
Standard: 2 GB HDD: 160 GB SD card	4 GB PCL accelerator 1 GB

1 GB = One billion bytes when referring to hard drive capacity. Actual format capacity is less.

10 °C (54 °F) to 35 °C (91 °F) (20 % to 85 % RH) 590 - 1,013 hpa

20 °C (68 °F) to 25 °C (77 °F) (65 ± 5 % RH)

Local voltage ± 10 % (For the power supply requirements, see the name plate in the lower corner of the left side of the machine.)

Power consumption Max. 1.44 kW (including options such as the desk)

MX-2610N/MX-3110N

583 mm (W) × 658 mm (D) × 834 mm (H)

(22-61/64" (W) × 25-29/32" (D) × 32-27/32" (H)) MX-3610N

608 mm (W) × 680 mm (D) × 834 mm (H)

(24-5/16" (W) × 26-25/32" (D) × 32-27/32" (H))

MX-2610N/MX-3110N	MX-3610N
Approx. 75 kg (165 lbs.)	Approx. 78 kg (171 lbs.)

MX-2610N/MX-3110N

850 mm (W) × 658 mm (D) (33-15/32" (W) × 25-29/32" (D)) MX-3610N

876 mm (W) × 680 mm (D) (34-31/64" (W) × 26-25/32" (D)) MX-2610N/MX-3110N

963 mm (W) × 658 mm (D) (37-59/64" (W) × 25-29/32" (D)) MX-3610N

1,015 mm (W) × 680 mm (D) (39-31/32" (W) × 26-25/32" (D))

18

CAUTION

Do not look directly at the light source.

Doing so may damage your eyes.

Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports.

Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.

The fusing unit and paper exit area are hot. When removing a misfeed, do not touch the fusing unit and paper exit area. Take care not to burn yourself.

When loading paper, removing a misfeed, performing maintenance, closing the front and side covers, and inserting and removing trays, take care that your fingers are not pinched.

The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.

With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.

Laser information

Wave length	790 nm ± 10 nm
Pulse times	Normal paper mode (P/S = 104 mm/s) = (5.15 µs ± 0.03 ns) / 7 mm
	Heavy paper mode (P/S = 70 mm/s) = (3.83 µs ± 0.03 ns) / 7 mm
Output power	Max 0.405 mW

„„ Caution

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)

„„ “BATTERY DISPOSAL”

THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED OF PROPERLY.

PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.

11