Sharp TINSE4796FCZZ, MX-C402SC manual Loading paper in a tray

CHANGING PAPER IN A TRAY

Loading paper in a tray

A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to size 8-1/2" x 14" (A5 to A4) can be loaded in trays 1 and 2.

A maximum of 500 sheets of paper from size 7-1/4" x 10-1/2" to size 8-1/2" x 14" (B5 to A4) can be loaded in trays 3 and 4.

Gently pull out the paper tray. If paper remains in the tray, remove it.

Move the two guides on the tray. Load the paper so that it is not as shown below when viewed from the front and side of the machine.

The loaded paper should not go higher than these protrusions.

Insert the paper with the print side face up.

Fan the paper well before inserting it.

Indicator line

The indicator line indicates the maximum height of the paper that can be loaded in the tray. When loading paper, make sure that the stack is not higher than the indicator line.

For detailed information, see “TRAY SETTINGS FOR TRAY 1 TO 4” in “Chapter 1 - BEFORE USING THE MACHINE” in the Operation Guide.

21