Controlling the Projector via LAN | Sharp PG-F320W manual

Controlling the Projector via LAN

After connecting the projector to your network, enter the projector IP address in “Address” on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup screen that will enable control of the projector via the network.

Controlling the Projector

Using Internet Explorer

(Version 5.0 or later)

Complete connections to external equipment before starting the operation. (See pages 21- 25 of the projector’s operation manual.)

Complete the AC cord connection. (See page 25 of the projector’s operation manual.)

Note

•When connecting the projector to the LAN, use a LAN cable (Category 5). When connecting the projector to a hub, use a straight-through cable.

1 Start Internet Explorer (version 5.0 or later) on the computer.

2 Enter “http://” followed by the projector IP address set by the procedure on page 14 followed by “/” in “Address”, and then press the “Enter” key.

•When “DHCP Client” is set to “OFF” on the projector, IP address is 192.168.150.2. If you did not change the IP address in “3. Setting up a Network Connection for the Projector” (pages 13-14), enter “http://192.168.150.2/”.

3

A screen for controlling the pro- jector appears, ready for per- forming various status condi- tions, control, and settings.

-15

Image 15

Sharp PG-F320W Controlling the Projector via LAN, Controlling the Projector Using Internet Explorer, Version 5.0 or later

Contents

Setup Manual Sub 15 pin female connector Connecting Pin Assignments Connecting Pin Assignments RS-232C Specifications and Commands Computer control Communication conditionsBasic format ← O K Commands Control Contents BrilliantColorTM OK or ERR PAL Network settings on the computer Setting up the Projector Network Environment Connecting the Pro- jector to a Computer Setting an IP Address for the Computer Confirm or change an IP address for the setup computer Setting up a Network Connection for the Projector DNS Controlling the Projector Using Internet Explorer Controlling the Projector via LANVersion 5.0 or later Control Confirming the ProjectorControlling the Projector Status Status Network Security Setting and AdjustingSetting the Security Projector Settings & Adjustments General Making General Settings for the Network NetworkSetting for Sending E-mail when an Error Occurs Mail Originator Settings Occurs Service & Support Access URL Mail Recipient Settings When Connecting Using RS-232C Setting up the Projector Using RS-232C or Telnet ClickStartfrom theWindows desk- top and select Run When Connecting Using Telnet Advanced Setup Menu Setup Menu Main Menu View Setting Detail List VView All SettingSet Items Tings QQuit Unchanged Save Settings and QuitQuit without Saving Set SSave & Quit User Name Setting IP Address SettingDefault Gateway Setting Subnet Mask Setting RS-232C Baud Rate Set Password SettingProjector Name Setting Dhcp Client Setting Data Port Setting Disconnecting All ConnecSetting Auto Logout Time Entering Advanced Setup Menu Setting of Accept IP Ad- dress Carrying out Network Ping TestAccepting All IP Addresses Setting of Search Port Return to Default SettingsReturn to Main Menu Resetting the Lamp Timer of the Projector via LAN Resetting the Lamp Timer of the Projector via LAN Communication cannot be established with the projector Troubleshooting Troubleshooting \ After the initialization, carry out setting again