Setting up the Projector Using
Disconnecting All Connec-
tions ([D]Disconnect All)
Setting Auto Logout Time
(ADVANCED[1]Auto Logout Time)
It is possible to disconnect all the TCP/IP connec- tions currently recognized by the projector. Even if the COM Redirect port is fixed in the Busy status due to a problem, it is possible to force the Ready status back by carrying out this disconnection.
setup>d | 1 |
Disconnect All Connections(y/n)?y | 2 |
Now Disconnecting... |
|
|
|
1Enter “d” and press the “Enter” key.
2 Enter “y” and press the “Enter” key.
Note
•If Disconnect All is performed, the connection to the projector via network will be forcibly discon- nected.
Entering ADVANCED SETUP MENU
([A]Advanced Setup)
Enters ADVANCED SETUP MENU.
setup>a | 1 |
******************** ADVANCED SETUP MENU *********************** | |
[1]Auto Logout Time | [2]Data Port |
[5]Network Ping Test |
|
[6]Accept IP Addr(1) | [7]Accept IP Addr(2) [8]Accept IP Addr(3) |
[9]Accept All IP Addr | [0]Search Port |
[!]Restore Default Setting [Q]Return to Main Menu
advanced>
1 Enter “a” and press the “Enter” key.
If there is no input after a fixed time, the projector automatically disconnects network connection using the Auto Logout function. It is possible to set the time until the projector is automatically disconnected in units of a minute (from 1 to 65535 minutes).
advanced>1 |
|
| 1 | |
Valid range | : 0 to 65535 (minute) |
|
| |
note: if you enter “0”, auto logout function will be disable. |
|
| ||
Auto Logout Time : 5 |
|
| ||
Please Enter | :15 |
|
| 2 |
|
| |||
(change) | * | |||
1Enter “1” and press the “Enter” key.
2Enter numerical value and press the“Enter”key. Display set numerical value (*).
Note
•If the set value is made 0, the Auto Logout func- tion is disabled.
•If an invalid number is entered, an error message (“Parameter Error!”) will be displayed and the screen returns to the ADVANCED SETUP MENU.
Data Port Setting
(ADVANCED[2]Data Port)
Setting of TCP port number. It is possible to set in the range of 1025 to 65535.
advanced>2 |
|
| 1 | |
Valid range | :1025 to 65535 |
|
| |
Data Port | :10002 |
|
|
|
Please Enter | :10005 |
|
| 2 |
|
| |||
(change) | * | |||
1Enter “2” and press the “Enter” key.
2Enter numerical value and press the“Enter”key. Display set numerical value (*).
Note
•Set according to need. Normally, use with the fac- tory default setting.
-27
