Troubleshooting | Sharp PG-F320W specs

Troubleshooting

\Take the following steps for checking the network settings for the computer.

1.Open a command prompt (MS-DOS Prompt).

•In the case of Windows® 98 or 98SE: click “START” ➔ “Programs” ➔ “MS-DOS Prompt” in order.

•In the case of Windows® Me: click “START” ➔ “Programs” ➔ “Accessories” ➔ “MS-DOS Prompt” in order.

•In the case of Windows® 2000: click “START” ➔ “Programs” ➔ “Accessories” ➔ “Command Prompt” in order.

•In the case of Windows® XP: click “START” ➔ “All Programs” ➔ “Accessories” ➔ “Command Prompt” in order.

2.After launching the command prompt (MS-DOS Prompt), enter the command “ipconfig”, and press the “Enter” key.

Note

•Communication may not be established even after carrying out the network settings for the computer. In such cases, restart your computer.

C:\>ipconfig

Note

•Usage examples of ipconfig

C:\>ipconfig /? displays how to use “ipconfig.exe”.

C:\>ipconfig	displays the set IP address, subnet mask and default gateway.
C:\>ipconfig /all	displays all the setting information related to TCP/IP.

3. To return to the Windows® screen, enter “exit” and press the “Enter” key.

-33

Image 33

Sharp PG-F320W specifications Troubleshooting

Contents

Setup Manual Sub 15 pin female connector Connecting Pin Assignments Connecting Pin Assignments RS-232C Specifications and Commands Computer control Communication conditionsBasic format ← O K Commands Control Contents BrilliantColorTM OK or ERR PAL Network settings on the computer Setting up the Projector Network Environment Connecting the Pro- jector to a Computer Setting an IP Address for the Computer Confirm or change an IP address for the setup computer Setting up a Network Connection for the Projector DNS Controlling the Projector Using Internet Explorer Controlling the Projector via LANVersion 5.0 or later Controlling the Projector Confirming the ProjectorStatus Status Control Setting the Security Setting and AdjustingProjector Settings & Adjustments Network Security Setting for Sending E-mail when an Error Occurs Making General Settings for the Network NetworkMail Originator Settings General Occurs Service & Support Access URL Mail Recipient Settings When Connecting Using RS-232C Setting up the Projector Using RS-232C or Telnet ClickStartfrom theWindows desk- top and select Run When Connecting Using Telnet Advanced Setup Menu Setup Menu Main Menu View Setting Detail List VView All SettingSet Items Quit without Saving Set Save Settings and QuitSSave & Quit Tings QQuit Unchanged Default Gateway Setting IP Address SettingSubnet Mask Setting User Name Setting Projector Name Setting Password SettingDhcp Client Setting RS-232C Baud Rate Set Setting Auto Logout Time Disconnecting All ConnecEntering Advanced Setup Menu Data Port Setting Setting of Accept IP Ad- dress Carrying out Network Ping TestAccepting All IP Addresses Setting of Search Port Return to Default SettingsReturn to Main Menu Resetting the Lamp Timer of the Projector via LAN Resetting the Lamp Timer of the Projector via LAN Communication cannot be established with the projector Troubleshooting Troubleshooting \ After the initialization, carry out setting again