Image Projection (Continued)
Correcting Trapezoidal Distortion
When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction.
Note
•The Keystone Correction can be adjusted up to an angle of approximately ±40 degrees and the screen can also be set up to an angle of approximately ±40 degrees (When the Resize mode is set to “NORMAL” (see page 28)).
1
Press KEYSTONE to enter the Keystone Correction mode.
2
Press P/Q or O/R to adjust the Keystone Correction.
Note
•To return to the default setting, press RETURN while the
3
Press KEYSTONE.
•The
Adjustment buttons (P/R/O/Q)
RETURN button
KEYSTONE button
KEYSTONE | 0 |
ADJUST | END |
Shrinks upper side.
(Move the slide bar in the + direction.)
Shrinks lower side.
(Move the slide bar in the - direction.)
Info
•While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged.
26
