Sharp R-1505, R-1500, R-1501, R-1506, R-1502 C Vertical Exhaust Outside Ventilation, A Rotate 90˚

Models: R-1502 R-1506 R-1501 R-1505 R-1500

1 40
Download 40 pages 37.06 Kb
Page 11
Image 11
(C) VERTICAL EXHAUST: OUTSIDE VENTILATION

U N P A C K I N G A N D I N S T A L L A T I O N I N S T R U C T I O N S

(C) VERTICAL EXHAUST: OUTSIDE VENTILATION

1.Remove and save 2 screws from back edge and 3 screws from the top center of the Fan Cover Bracket. Remove Fan Cover Bracket by sliding it in the opposite direction of the arrow on the Fan Cover Bracket as shown in Figure 11.

2.Lift Hood Fan Unit carefully and slip wires out of cavity. See Figure 12. CAUTION: Do not pull or stretch hood fan wiring.

3.Rotate the Hood Fan Unit 90˚ so that the fan blade openings are facing the top of the oven. See Figure 13 (A). Replace Hood Fan Unit into the oven. Be careful not to pinch the lead wire between the inner bracket and the Hood Fan Unit. Put the lead wire into Wire Box. See Figure 13 (B).

4.Replace the Fan Cover Bracket by sliding it into the slits in the same direction as the arrow on the Fan Cover Bracket. Make sure the fan blades are visible through the top openings in the oven before proceeding.

5.Attach the Fan Cover Bracket to unit with the 2 screws from back edge and 3 screws from the top center of the Fan Cover Bracket, which were removed in Step 1 above. See Figure 14. The Hood Fan Unit is now rotated for vertical exhaust operation.

6.Attach the Exhaust Damper Assembly 9 to the fan cover on the top of the outercase cabinet by sliding it into the slits in the same direction as the arrow. Use 1 Tapping Screw 4 X12 mm 5 from the INSTALLATION HARD- WARE and tighten into place. See Figure 15.

Figure 11

Figure 12

(B)

Figure 13

Figure 14

(A) Rotate 90˚

Figure 15

Exhaust Damper Assembly

11

Page 11
Image 11
Sharp R-1505, R-1500, R-1501, R-1506, R-1502 manual C Vertical Exhaust Outside Ventilation, A Rotate 90˚