Sharp R-1505, R-1500 R E P L A C I N G P A R T S, Charcoal Filter, Work Light And Night Light

Models: R-1502 R-1506 R-1501 R-1505 R-1500

1 40
Download 40 pages 37.06 Kb
Page 31
Image 31
R E P L A C I N G P A R T S

R E P L A C I N G P A R T S

CHARCOAL FILTER

Charcoal Filter, Sharp part number RK-240 which was installed in your oven, is used for nonvented, recircu- lated installation. The filter should be changed every 6 to 12 months depending on use. See page 14 for ordering information.

1.Disconnect power to the oven at the circuit breaker panel or by unplugging.

2.Remove the three louver mounting screws and push down carefully on the tab at each end of the louver to disengage it. (See illustration.)

3.Pull the louver away from the unit.

4.Change the charcoal filter.

5.Carefully push the louver back into place (engaging both the bottom and top tabs) and replace the screws removed in step 2.

Top tab

Louver

Charcoal filter

(white side faces front)

Screw

Screw

Bottom tab

WORK LIGHT AND NIGHT LIGHT

1.To replace light bulbs, first disconnect power to the oven at the circuit breaker panel or by unplugging.

2.To release cover, remove the screw on the light cover. (See illustration.)

3.Replace light bulbs with equivalent watt bulb available from your Sharp Authorized Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE A BULB LARGER THAN 30 WATTS.

4.Close light cover and secure with screw removed in step 2.

CAUTION: Light cover may become very hot. Do not touch glass when light is on.

Light cover

Screw

Light bulbs

 

Screw

31

Page 31
Image 31
Sharp R-1505, R-1500, R-1501, R-1506, R-1502 manual R E P L A C I N G P A R T S, Charcoal Filter, Work Light And Night Light