Sharp R-190HK/HW O C E D U R E D I S P L a Y, To SET the Clock, Time Cooking, To SET Power Level

B E F O R E O P E R AT I N G M A N U A L O P E R AT I O N

•Before operating your new microwave oven make sure you read and understand this operation manual completely.

•Before the oven can be used, follow these pro- cedures:

1. Plug in the oven. Close the door. The oven dis-

play will then begin flashing 88:88 .

2.Touch STOP/CLEAR pad.

:will appear.

3.Touch CLOCK pad to set clock.

TO SET THE CLOCK

•Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.).

	P R O C E D U R E		D I S P L A Y
1		TIMER	: 0
		CLOCK

TIME COOKING

Your oven can be programmed for 99 minutes 99 seconds (99.99). Always enter the seconds after the minutes, even if they are both zeros.

• Suppose you want to cook for 5 minutes at 100%.

P R O C E D U R E D I S P L A Y

1		5		0	0	5	. 0 0
	Enter cooking time.
2			START			ON 5	. 0 0
		MINUTE PLUS

Touch START pad.

TO SET POWER LEVEL

Touch CLOCK pad.

The colon (:) will flash.

There are eleven preset power levels.

Using lower power levels increases the cooking

2

1

2

3

0

1 2 : 3 0

time which is recommended for foods such as

cheese, milk and long slow cooking of meats. Con-

Enter the correct time of

sult cookbook or recipes for specific recommen-

day by touching the

dations.

numbers in sequence.

To lower the power, touch POWER LEVEL pad

once. Note the display will indicate “P-HI” (HIGH,

3

TIMER

1 2 : 3 0

100%). To lower to “90%” touch POWER LEVEL

CLOCK

pad again. Repeat as necessary to select 80% -

Touch CLOCK pad again.

0%.

• Suppose you want to defrost for 5 minutes at

This is a 12 hour clock. If you attempt to enter an

30%.

incorrect clock time,

EE

will appear in the

P R O C E D U R E

D I S P L A Y

display. Touch STOP/CLEAR

pad and re-enter the

time.

• If the electrical power supply to your microwave

1

5

0

0

5 . 0 0

oven should be interrupted, the display will inter-

mittently show

88:88

after the power is rein-

Enter defrost time.

stated. If this occurs during cooking, the program

will be erased. The time of day will also be erased.

2

POWER

P - 3 0

Simply touch STOP/CLEAR pad and reset the

LEVEL

x 8

clock for the correct time of day.

STOP/CLEAR

Touch POWER LEVEL

pad 8 times or hold down un-

Touch STOP/CLEAR pad to:

til the desired power level ap-

pears.

1. Erase if you make a mistake during program-

ming.

2. Cancel timer.

3

START

ON 5 . 0 0

MINUTE PLUS

3. Stop the oven temporarily during cooking.

4. Return the time of day to the display.

Touch START pad.

5. Cancel a program during cooking, touch twice.

4 When the defrost time is complete, a long

tone will sound and

will appear in

the display.

9