Sharp R-216LS service manual Sealer Film, Figure C-7. Door Replacement

R216LS

NOTE: The door on a microwave oven is designed to act as an electronic seal preventing the leakage of microwave energy from oven cavity during cook cycle. This function does not require that door be air-tight, moisture (conden- sation)-tight or light-tight. Therefore, occasional appear- ance of moisture, light or sensing of gentle warm air movement around oven door is not abnormal and do not of themselves, indicate a leakage of microwave energy from oven cavity.

Pin

Upper Oven Hinge

Slit Choke

Door

Panel

Lower Oven

Hinge

Choke Cover

Lower

Oven

Pin Hinge

Figure C-7. Door Replacement

4. SEALER FILM

1.Put the adhesive tape on the backing film of the sealer film as shown in Fig. C-8

2.Tear the backing film by pulling the adhesive tape.

3.Put the pasted side of the sealer film on the door panel

Sealer film Backing film

Adhesive tape

Figure C-8. Sealer film

11 – 7