Sharp R-23AM, R-25AM manual Other Convenient Features, Repeat Cook, Information With Error Messages

As the time to be set increases, the timer steps in larger increments (units), as shown on the table below. Ex. for R-22AM/23AM: If a time between 0 - 60 seconds is entered, the cooking time will increase in 2 second steps, whereas if the time is between 10 - 30 minutes each step will be a 30 second increment.

COOKING TIME SETTING UNIT

(For R-22AM/23AM)

COOK TIME		UNIT
0	- 60 seconds	2 seconds
60 seconds - 3 minutes		5 seconds
3	- 10 minutes	10 seconds
10 - 30 minutes		30 seconds

(For R-25AM)

COOK TIME		UNIT
0	- 20 seconds	2 seconds
20 seconds - 1 minute		5 seconds
1	- 6 minutes	10 seconds
6	- 15 minutes	30 seconds
15 - 30 minutes		1 minute

OTHER CONVENIENT FEATURES

REPEAT COOK

Your oven can memorize the last cooking time in each power level. If you use this function, you have no need to enter the cooking time.

Example: Suppose you want to use this function at 100%. (The last cooking time is 10 min.).

POWER

/100%		%
Choose	desired	Check the display.
p o w e r	l e v e l
(100%).

		POWER
	ON	%
Start to cook.	Check the display.

INFORMATION WITH ERROR MESSAGES

If ERROR messages are displayed, follow the below instructions.

ERROR MASSAGES

EE1,EE2,EE3,	Please contact your dealer or an authorized Sharp service agent because the oven
EE6,EE10,EE16	must be out of order.
EE8,EE0
(For R-22AM/23AM)
EE19
(For R-25AM)
EE7	Exhaust air temprature is too high. Checking that nothing is blocking the ventilation
	openings or that room temperature is very hot or that oven cavity is empty during
	operation. Correct and try again after a few minutes.
EE17	Magnetron temperature is too high, open and close the door twice, and then try again
	after a few minutes.
EE9	The time you set exceeds a maximum time. Open and close the door twice, and
(For R-25AM)	enter appropriate time.

5