Sharp R-530EK Specification, General Information, Description, Grounding Instructions

R - 5 3 0 E K

R - 530EW

		SPECIFICATION
ITEM			DESCRIPTION
Power Requirements	120 Volts / 13.8 Amperes
	60 Hertz
	Single phase, 3 wire grounded
Power Output	1200 watts (IEC TEST PROCEDURE)
	Operating frequency of 2450MHz
Case Dimensions	Width	24"
	Height 13-3/8"
	Depth	19-1/8"
Cooking Cavity Dimensions	Width	17-3/8"
	Height 10-1/2"
2.0 Cubic Feet	Depth	18-5/8"
Control Complement	Touch Control System
	Clock ( 1:00 - 12:59 )
	Timer (0 - 99 min. 99 seconds)
	Microwave Power for Variable Cooking
	Repetition Rate;
	100	PERCENT	............................. Full power throughout the cooking time
	90	PERCENT	............................................... approx. 90% of Full Power
	80	PERCENT	............................................... approx. 80% of Full Power
	70	PERCENT	............................................... approx. 70% of Full Power
	60	PERCENT	............................................... approx. 60% of Full Power
	50	PERCENT	............................................... approx. 50% of Full Power
	40	PERCENT	............................................... approx. 40% of Full Power
	30	PERCENT	.............................................. approx. 30% of Full Power
	20	PERCENT	............................................... approx. 20% of Full Power
	10	PERCENT	............................................... approx. 10% of Full Power
	0	PERCENT	.............................. No power throughout the cooking time
	Sensor Cooking pads, Breakfast pad, Lunch pad
	15 Minute Recipes pad, Defrost Center pad, From the Pantry pad
	Beverage Center pad, Number selection pads, Timer/Clock pad
	Keep Warm Plus pad, Minute Plus pad, Power Level pad
	Stop/Clear pad, Start/Touch On pad
Oven Cavity Light	Yes
Safety Standard	UL Listed		FCC Authorized
	DHHS Rules, CFR, Title 21, Chapter 1, Subchapter J

GENERAL INFORMATION

GROUNDING INSTRUCTIONS

This oven is equipped with a three prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.

WARNING: Improper use of the grounding plug can result in a risk of electric shock.

Electrical Requirements

The electrical requirements are a 120 volt 60 Hz, AC only, 15 or 20 amp. fused electrical supply. It is recommended that a separate circuit serving only this appliance be provided. When installing this appliance, observe all applicable codes and ordinances.

A short power-supply cord is provided to reduce risks of becoming entangled in or tripping over a longer cord.

4