Sharp R-92STM operation manual Building-In-Kit, Electrical Connection, Installation

Models: R-92STM

1 36
Download 36 pages 42.64 Kb
Page 19
Image 19
BUILDING-IN-KIT

INSTALLATION

WARNING: Do not place the oven where heat, moisture or high humidity are generated, (for example, near or above a conventional oven) or near combustible materials (for example, curtains).

Do not block or obstruct air vent openings. Do not place objects on top of the oven.

This symbol means that the surfaces are liable to get hot during use.

BUILDING-IN-KIT

No built-in kit is available for this oven.

This oven is designed to be used on a countertop only.

ELECTRICAL CONNECTION

Do not allow water to come into contact with the power supply cord or plug.

Insert the plug properly into the socket.

Do not connect other appliances to the same socket using an adaptor plug.

If the power supply cord is damaged, it must be replaced by a Sharp approved service facility or a ELECTRICAL CONNECTIONed person to avoid a hazard.

When removing the plug from the socket always grip the plug, never the cord as this may damage the power supply cord and the connections inside the plug.

ENGLISH

GB-17

Page 19
Image 19
Sharp R-92STM operation manual Building-In-Kit, Electrical Connection, Installation