Sharp R-92STM GB-20, Opening the door, Starting the oven, Cooking Time, Increasing Unit, Example

Models: R-92STM

1 36
Download 36 pages 42.64 Kb
Page 22
Image 22
Opening the door:

Opening the door:

To open the oven door, pull the door handle.

Starting the oven:

Prepare and place food in a suitable container onto the turntable or place directly onto the turntable. Close the door and press the START/+30sec./ENTER button after selecting the desired cooking mode.

Once the cooking programme has been set if the START/+30sec./ENTER button is not pressed in 5 minutes, the setting will be cancelled.

The START/+30sec./ENTER button must be pressed to continue cooking if the door is opened during cooking. The audible signal sounds once by efficient press, inefficient press will be no response.

Use the STOP/CLEAR key to:

1.Erase a mistake during programming.

2.Stop the oven temporarily during cooking.

3.Cancel a programme during cooking, press the STOP/CLEAR key twice.

4.To set and to cancel the child lock (refer to page GB-23).

Your oven can be programmed for up to 95 minutes (95.00).

The input unit of cooking (defrosting) time varies from

Cooking Time

Increasing Unit

5 seconds to 5 minutes. It depends on the total length

0-1 minutes

5 seconds

of the cooking (defrosting) time as shown on the table.

1-5 minutes

10 seconds

 

5-10 minutes

30 seconds

 

10-30 minutes

1 minute

 

30-95 minutes

5 minutes

START/+30sec./

ENTER button

MANUAL COOKING/ MANUAL DEFROSTING

Enter the cooking time and use the microwave power levels P100 to P10 to cook or defrost (see example below).

Stir or turn the food, where possible, 2 - 3 times during cooking.

After cooking, cover the food and leave to stand, where recommended.

After defrosting, cover the food in foil and leave to stand until thoroughly defrosted.

Example:

To cook 2 minutes and 30 seconds on 80% microwave power.

1.Input the power level by pressing the MICRO. POWER button twice times for P80 or turn the ENTRY dial to select the microwave power to P80.

MICRO. POWER x2 or Starting the oven:

2.Press the START/+30sec./ ENTER button to confirm the selected power level.

P80

At the same time the microwave and high heat indicator will light up on the display.

3.Enter desired cooking time by rotating the ENTRY dial.

2:30

4.Press the START/+30sec./ ENTER button to start the timer. (The display will count down through the set cooking time.)

2:30

NOTE:

When the oven starts, the oven lamp will light and the turntable will rotate clockwise or anticlockwise. If the door is opened during cooking/defrosting to stir or turn over food, the cooking time on the display stops automatically. The cooking/ defrosting time starts to count down again when the door is closed and the START/+30sec./ENTER button is pressed.

When cooking/defrosting is complete, the time of day will reappear on the display, if the clock has been set.

If you wish to know the power level during cooking, press the MICRO. POWER button. The current power level will be displayed for 2-3 seconds.

IIMPORTANT:

Close the door after cooking / defrosting. Please note that the light will remain on for 10 minutes when the door is open, this is for safety reason to remind you to close the door.

GB-20

Page 22
Image 22
Sharp R-92STM GB-20, Opening the door, Starting the oven, Cooking Time, Increasing Unit, START/+30sec, Example, Iimportant