CONFIGURING THE PRINT SERVER
If you want to use the print server built into the Barricade Router, then you must first install the Port Monitor program as described in the following section for Windows 95/98/Me/NT/2000.
To configure the Barricade Print Server for Windows 95/98/Me/ NT/2000, or Unix, see “Configure the Print Server” on page 66.
Install the SMC Printer Port Monitor
Skip this section if you are using Unix.
For Windows 95/98/Me/NT/2000 clients, you need to install the port monitor program as described in this section.
1.Insert the installation
2.The next screen indicates that the print client uses TCP/IP network protocol to monitor print requests. Click Next.
63