SMC Networks S M C 7 0 0 4 A B R, SMC7004ABR manual Hardware Description, Front and Rear Panels

Hardware Description

•4 RJ-45 ports for connection to a 10BASE-T/100BASE-TX Ethernet Local Area Network (LAN). These ports can auto-negotiate the operating speed to 10/100 Mbps, the mode to half/full duplex, and the pin signals to MDI/MDI-X

(i.e., allowing these ports to be connected to any network device with straight-through cable). These ports can be connected directly to a PC or to a server equipped with an Ethernet network interface card, or to a networking device such as an Ethernet hub or switch.

•One RJ-45 port for connection to a DSL or cable modem

•

•

(WAN). This port also auto-negotiates operating speed to 10/100 Mbps, the mode to half/full duplex, and the pin signals to MDI/MDI-X.

One RS-232 serial port to connect to an ISDN Terminal Adapter (TA) or to a PSTN analog modem.

One parallel printer port that can be connected to a printer. This printer can then be shared by any LAN users.

The following figure shows the components of the Barricade Router:

				LAN
SMC7004ABR	Power	WAN			Link/Act
					10/100
Reset		1	2	3	4
					1	2	3	4
	PRINTER				WAN		COM	12V	1A

Figure 1. Front and Rear Panels

5