SMC Networks S M C 7 0 0 4 A B R, SMC7004ABR manual Verifying Your TCP/IP Connection, Setting Up TCP/IP

Setting Up TCP/IP

3.On the DNS Configuration tab, add the IP address for the Barricade Router and click Add. This automatically relays DNS requests to the DNS server(s) provided by your ISP. Otherwise, add specific DNS servers into the DNS Server Search Order field and click Add.

4.After finishing TCP/IP setup, click OK, and then reboot the computer. After that, set

up other PCs on the LAN according to the procedures described above.

Verifying Your TCP/IP Connection

After installing the TCP/IP communication protocols and configuring an IP address in the same network as the Barricade Router, use the Ping command to check if your computer has successfully connected to the Barricade Router. The following example shows how the Ping procedure can be executed in an MS-DOS window. First, execute the Ping command:

ping 192.168.2.1

If a message similar to the following appears:

Pinging 192.168.2.1 with 32 bytes of data:

Reply from 192.168.2.1: bytes=32 time=2ms TTL=64

a communication link between your computer and the Barricade Router has been successfully established.

If you get the following message,

23