Quick guide
Before turning on the power
n |
|
|
|
|
|
|
|
|
| DOLBY |
|
|
|
|
|
RF IN | RF OUT |
| TV | SPDIF | USB |
|
|
|
|
|
|
| DC 12V DC | IN | |
|
| HDMI |
| OPTICAL |
|
| |
| ETHERNET | VCR |
| - | + |
| |
|
|
| o |
|
|
| p |
nConnect the antenna (standard DIN45325 plug (IEC
oConnect the HDMI cable
pConnect the power adapter
Initial auto installation
Place the TV close to the AC outlet, and keep the power plug within reach.
When the Recorder is powered on for the first time after purchase, the first time installation screen appears. Follow the
Confirm the following before turning on the power
EIs the antenna cable connected?
EIs the power adapter connected and plugged in?
EIs the HDMI cable connected between the Recorder and your TV?
1Press aon the Recorder.
• The first time installation screen is displayed.
2Ensure the antenna cable is connected.
3Press OK to start the channel search.
•The Recorder will search for, sort and store all receivable channels.
NOTE
•The first time installation process will be aborted if the Recorder is left unattended for more than 30 minutes before searching for channels.
•After the first time installation has been completed, the default PIN is automatically set to ‘0000’. To change the PIN setting, refer to Page 22.
First Time Installation
Please ensure that an aerial is connected
Then press OK to scan for services
9
29/06/2010 15:16:15
