Sharp UP-820F, UP-820N 9. Programming for the Manager Work Station (MWS) master and satellite

51
The LAN interface for the UP-820F/UP-820N POS enables the UP-820F/UP-820N to perform in-line
communications to a host P.C. through the connection to a Manager Work Station (MWS).
For the setup of the Manager Work Station, please be sure to consult your authorized SHARP dealer.
The function of Manager Work Station:
1) Downloading of the terminal data [Terminal PC]
2) Uploading of the terminal data [Terminal PC]
3) Remote Job Entry (RJE) function [Terminal PC]
4) T-LOG function [Terminal PC]
5) ELECTRONIC MAIL function [Terminal PC]
(1) Programming of the MWS terminal number
The terminal number of MWS can be specified by the following procedure:
1. Enter the PGM2 mode from the mode selection window.
2. Select “SETTING” and press the ekey.
The SETTING window will appear.
3. Select “MWS CONFIG” and press the ekey.
The MWS CONFIG window will appear.
4. Move the cursor to the “IP ADDRESS 4” line.
Enter the terminal number (0-254) in the IP ADDRESS 4 line
of MWS and press the ckey.
• Entering a terminal number of the machine itself results in
“ENTRY ERROR”.
9. Programming for the Manager Work Station (MWS)
– master and satellite