TINS-A082UMN1.book Page 22 Monday, November 4, 2002 2:33 PM

ADVANCED OPERATION

AUDIO AND YOUR VCR

HI-FI STEREO SOUND

Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows:

Press the AUDIO OUT button once. The LEFT audio channel will be sent to BOTH speakers. L will appear on the VCR display.

Press the AUDIO OUT button again. The RIGHT audio channel will be sent to BOTH speakers. R will appear on the VCR display.

Press the AUDIO OUT button a third time and the MONO track will be sent to BOTH speakers. L and R will not appear on the VCR display.

Pressing the AUDIO OUT button a fourth time, normal Hi-Fi stereo sound will be heard. L and R will appear on the VCR display.

NICAM Hi-Fi STEREO SOUND

Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the procedure below:

1.Press the MENU button to display the main menu on the screen.

2. Press the [ / ] menu select buttons to

N I CAM

AU T O

O F F

CO L OUR

AU T O

P A L

select MODE then press theSET SET button to

 

 

 

confirm.

 

 

 

The MODE menu will be displayed with NICAM selected.

3.

Press [ / ]to select OFF.

4.

SET

 

 

Press the SET

button to confirm and return to the main menu screen.

5.

Press the MENU

 

button to exit to normal screen.

 

 

 

 

NOTES:

If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R will not appear on the display.

lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality may be

improved by adjusting the tracking using the VCR CHANNEL / buttons.

If the poor quality is for a long period the VCR will automatically select the mono track and the sound will be in mono.

NICAM sound may not be stereo.

www.sharp.co.uk/support

22

Page 24
Image 24
Sharp VC-MH835HM operation manual Audio and Your VCR, HI-FI Stereo Sound