Manuals / Sharp / Photography / Camcorder

Sharp VL-A110U Installing the Lithium Memory Battery, Removing the Lithium Battery

Models: VL-A110U

1 72

Download 72 pages 56.46 Kb

Page 20

Preparation

Preparation

Installing the Lithium

Memory Battery

The supplied lithium battery is used to store the memory of the date and time settings.

1 Slide the cassette compartment door release and open the cassette compartment door.

Cassette compartment door release

Note: The cassette holder will extend and open when the VIEWCAM is connected to a power source. Be sure to close the cassette holder before proceeding to the next step (see page 10).

2 Pull out the lithium battery holder using a pointed object such as the tip of a ballpoint pen.

Lithium battery holder

3 Insert the lithium battery into the battery holder with the ` side of the battery facing the j side of the holder.

j mark

4 Push the battery holder back into position.

5 Close the cassette compartment door by

pressing the center until it clicks into place.

Removing the Lithium Battery

Perform steps 1 and 2 above, then lift out the battery from the battery holder.

Note:

•Replace the battery with a new CR2025 battery when the date and time indicator starts to fall behind the correct time.

Notes on the Use of the Lithium Battery

REPLACE BATTERY WITH TOSHIBA, MATSUSHITA OR HITACHI MAXELL TYPE CR2025 ONLY. USE OF A DIFFERENT BATTERY MAY PRESENT A RISK OF FIRE OR EXPLOSION.

WARNING KEEP THIS BATTERY AWAY FROM CHILDREN. IF SWALLOWED, CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.

CAUTION BATTERY MAY EXPLODE IF MIS- USED OR INSTALLED WITH POLARITY REVERSED. DO NOT RECHARGE, DISAS- SEMBLE OR DISPOSE OF IN FIRE.

•Do not short-circuit, recharge, disassemble, or heat the lithium battery.

•Should the lithium battery leak, wipe the battery compartment and holder clean, and then insert a new battery.

•The lithium battery will last about one year of normal usage.

11

Image 20

Sharp VL-A110U operation manual Installing the Lithium Memory Battery, Removing the Lithium Battery

Contents

See page 54 for use of Demo mode VL-A110UThank you for purchasing this Viewcam from Sharp Applies to the supplied AC adapterInformation Iii Should never be blocked by placingPage Do not aim the lens at the sun Avoid shocks and droppingAC Adapter CleaningLCD Monitor Screen Vii Viii Tripod adapter For 180 recordingContents Useful Features Advanced FeaturesReferences Gamma Brightness CompensationWhen the cassette compartment door is open Part NamesOperation Summary Cassette compartment door pRear view Remote sensor pQuick Reference Index Video cassette is defective and should be Battery Pack Inserting the Battery PackRemoving the Battery Pack Inserting and RemovingTime Charging the Battery PackContinuous Powering the Viewcam from an AC Outlet Inserting and Removing a Cassette Inserting a CassetteRemoving a Cassette Perform above, then take out the cassetteInstalling the Lithium Memory Battery Removing the Lithium BatteryChanging the Language Setting the LanguageSelecting the Language for the On-screen Display Camera Mode VCR ModeFrench On-screen Displays Spanish On-screen Displays Setting the Date and Time Changing to the 24-hour Time ModePress the SET button B 0 0Using the Hand Strap and the Lens Cap Attaching the Shoulder StrapAttaching and Removing the Lens Cap LCD screen sideEasy Camera Recording with Full Auto Mode To Turn the Power OffTo Pause Recording Maximum Continuous Recording and Actual Recording TimesBasic Operations Camera Recording ZoomingTips on Recording Positions Remaining Recording Time Display Remaining Battery Power DisplayApprox. remaining On-screen Recording time Indicator Volume Control PlaybackTo Stop Playback Auto Tape RewindPlayback Watching the Playback on aThis Viewcam does not have an S-video socket Basic Operations Playback Video SearchStill Useful Features Operations of the On-screen ControlsMenu button Display buttonDesired setting Press the SET button B to selectPress the or button C or D to select the desired menu item Perform steps 4 to 6 aboveRecording the Date and Time Press the or button to select DisplayPress the SET button B to select AUTO, ON, or OFF Press the button to select SelectSelecting Fade Mode Using Fade ModeFade In and Fade Out Type of Fade ModesTo use fade out only To cancel Fade modeQuick Review Quick Return Edit Search QU I CKTo cancel Gamma Brightness Compensation Gamma Brightness CompensationTo obtain a brighter picture Press the Gama EFF. button a againTo cancel the gain-up function Gain-up Cat’s EyeWide Screen Macro ShotsRemoving the Lens Hood To return to normal pictureSelf Recording Normal Self RecordingMore Information on Self Recording To pause recording, press the REC Stop button BSelf-recording Message Setting the Viewcam to Full Auto Mode BlueUseful FeaturesProgram Search Tape Counter Feature Using the CounterTo reset the counter to zero To turn off the tape counterPress the Play button D to view the desired scene Using the Counter MemoryDuring playback, press the Menu Button until appears Using the Remote Control Installing the Batteries in the Remote ControlTurning On the Remote Control Mode Operating the Remote ControlTo cancel the digital picture effect Advanced FeaturesDigital Picture Effects Type of Digital Picture EffectsType of Scene Settings To cancel the scene settingScene Menu Program AE Select Scene Menu in aboveSuperimposing a Title Changing the Preset Titles Press the Reset button to display the title input screenPress the or ß button Q to select Top of the screen and the cursor willTo cancel Manual Focus mode Auto/Manual FocusAuto Focus Manual FocusPress the White BAL. button. White BAL. returns to blue To cancel White Balance LockWhite Balance Lock Perform steps 1 and 2 above, then press the Auto button B To cancel Manual Exposure modeManual Exposure Type of Backlight Modes Picture/Backlight AdjustmentsPress the Menu button until Camera mode or VCR mode appears To cancel Gamma Playback Gamma PlaybackTurning Off the LCD Monitor Backlight Press the Gama EFF. button again. Gamma disappearsSetting Edit Mode EditingCutting Unwanted Sequences To stop editingUseful Information Hints for Better ShootingLighting Tips on Good LightingDew Formation Dirty Video HeadsBattery Pack Replacing the Fluorescent LampUse only tapes with the mark with this Using Your Viewcam AbroadReferences Video Cassette Tapes Watching the Demonstration Demonstration ModeCanceling Demo Mode Before Requesting Service Symptom Possible cause Suggested solutionVCR Specifications Service Information For the U.SBattery Pack BT-H22 AC Adapter UADP-0312TAZZInserción y extracción de la BateríaInserción de la batería Extracción de la bateríaGuía de operació n rá pida en españ ol Carga de la bateríaSelecció n de idioma para la visualizació n en pantalla Inserció n y extracció n de un videocasete Inserció n de un videocaseteExtracció n de un videocasete Realice el paso 1 de arriba y luego saque el videocasetePara hacer una pausa en la grabació n Para desconectar la alimentació nPulse el botón REC START/STOP para iniciar la grabación BateríaControl de volumen Reproducció nPara detener la reproducció n Rebobinado automá tico de la cintaValid for warranty service in the U.S. only Where to Obtain Service What to do to Obtain ServiceSharp Plaza, Mahwah, New Jersey Osaka, Japan