Setting Up the Projector

Setting Up the Projector

For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat and level. Doing so will eliminate the need for Keystone correction and provide the best image quality. (See page 32.)

Standard Setup (Front Projection)

■Place the projector at the required distance from the screen according to the desired picture size. (For details, refer to the “SETUP MANUAL” con- tained on the supplied CD-ROM.)

Example of standard setup
Side View

 

 

Base line:

Screen

 

Horizontal line passing through

 

 

the lens center

 

 

Lens center

H

L: Projection distance

Ceiling-mount Setup

■ It is recommended that you use the optional Sharp ceiling -mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately).

•For the U.S.A.: AN-XGCM55 ceiling-mount bracket, its

AN-EP101B extension tube and AN-JT200 universal bracket, adaptor for non-level ceiling installation.

• For countries other than the U.S.A.: AN-60KT ceiling- mount bracket, its AN-TK201 and AN-TK202 extension tubes.

■Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See page 52 for use of this function.

-18