4Keystone Correction
When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction.
Auto Keystone Correction
Set “Auto Keystone” on the “Options1” screen menu to “On”.Manual Keystone Correction
Set “Auto Keystone” on the “Options1” screen menu to “Off”, and select“Keystone”, then adjust with the slide bar.
Manual Correction\ button |
| button |
|
|
|
|
|
|
|
|
|
|
|
|
Menu operation Page 42
6Selecting a Startup and Background Image
Selectable items | Description |
Logo | SHARP default image |
Blue | Blue screen |
None | Black screen |
7Eco/Quiet Mode Setting
Select- |
|
| Power |
| |
Bright- | Fan | consumption | Lamp life | ||
able | |||||
ness | Sound | (When using | |||
items |
| ||||
|
| AC 110V) |
| ||
|
|
|
| ||
On | 80% | Low | 300 W | Approx. | |
|
|
|
| 3,000 | |
|
|
|
| hours | |
Off | 100% | Normal | 360 W | Approx. | |
|
|
|
| 2,000 | |
|
|
|
| hours | |
|
|
|
|
|
Note
•The Keystone Correction can be adjusted up to an angle of approximately ±12 degrees with the “Auto Keystone” and up to an angle of approximately ±40 degrees with the manual “Keystone”.
(when “Resize” is set to “Normal”)
•When the screen is slanting or the image is deterio- rated, set “Auto Keystone” to “Off”.
•When adjusting the keystone or when “Auto Keystone” is set to “On”, “Image Shift” is auto matically set to “0”.
5Setting On-screen Display
This function allows you to turn the Selectable items | Description | ||
On | All | ||
|
|
|
|
Off | • INPUT mode/VOLUME/AV MUTE/ | ||
| FREEZE/AUTO SYNC/ENLARGE/ | ||
| “An invalid button has been pressed.” | ||
| are not displayed. | ||
| • “All buttons on Projector are locked.” | ||
| is displayed when |
| STANDBY/ON is |
|
| ||
|
| ||
| pressed while the Keylock function is | ||
| active. |
Note
•When “Eco/Quiet Mode” is set to “On”, the power consumption will decrease and the lamp life will extend. (Projection brightness decreases 20%.)
•You can also use ECO/QUIET button on the re- mote control or on the projector to switch the Eco/ Quiet Mode. (See page 36.)
8Auto Power Off Function
Selectable items | Description |
On | The projector automatically enters the |
| standby mode when no input signal is |
| detected for 15 minutes or longer. |
Off | The Auto Power Off function will be |
| disabled. |
Note
•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters the standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.