Sharp XG-C335X Using the “Options1” Menu, 2Setting the Resize Mode, 3Adjusting the Image Position, 1Checking the Lamp Life Status, You can move the projected image vertically

Using the “Options1” Menu

	Options1				VIDEO
1	Lamp Timer (Life)			0 h ( 100%)
2	Resize		Normal
3	Image Shift	0
4	Keystone	0
	Auto Keystone		On
5	OSD Display		On
6	Background		Logo
7	Eco/Quiet Mode		On
8	Auto Power Off		On
9	System Sound		On
0	Menu Position		Center
q	System Lock		Disable
w	Direct Power On		Disable
	SEL./ADJ.			ENTER
	RETURN			END

Menu operation Page 42

2Setting the Resize Mode

Note

•For details of the Resize mode, see pages 37 and 38.

•You can also press RESIZE on the remote control to set the resize mode. (See page 37.)

3Adjusting the Image Position

You can move the projected image vertically.

1Checking the Lamp Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life
	“Life”	100%	5%
Operated exclusively		Approx.	Approx.
while “Eco/Quiet Mode”
		3,000 hours	150 hours
is “On”.
Operated exclusively		Approx.	Approx.
while “Eco/Quiet Mode”
		2,000 hours	100 hours
is “Off”.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•Remaining lamp life changes within the range of the values shown depending on the frequency at which “Eco/Quiet Mode” is switched to “On” and “Off”. (See page 48.)

•The lamp life may vary depending on the us- age condition.

\ button button

Note

•This function only works in some RESIZE modes. (See pages 37 and 38.)

•To reset this function, select “0”.

•When adjusting the image shift, “Keystone” is set to “0” and “Auto Keystone” is set to “Off”.

Features Useful

-47