
9DHCP Client Setting
Connect the LAN cable before turning the projector on. If not, the DHCP Client function does not work.
Selectable items | Description |
On | Obtains configuration parameters for |
| TCP/IP network automatically. |
Off | Sets the TCP/IP manually. |
Select “On” for “DHCP Client”, then press ENTER. “Obtaining IP Address...” appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.
If the DHCP server is not available, “Could not obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the item 0.)
0TCP/IP Setting
Set the TCP/IP manually.1 Select “Off” for “DHCP Client”, then press




| Menu operation | Page 42 |
|
|
|
Selectable items | Description |
|
IP Address | Factory default setting: |
|
| 192.168.150.002 |
|
| Enter an IP address appropriate for the | |
| network. |
|
Subnet Mask | Factory default setting: |
|
| 255.255.255.000 |
|
| Set the subnet mask to the same as | |
| that of the computer and equipment on | |
| the network. |
|
Gateway | Factory default setting: |
|
| 000. 000. 000. 000 |
|
| * When not in use, set to: |
|
| “000. 000. 000. 000”. |
|
Note
•Confirm the existing network’s segment (IP ad- dress group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don’t have to change the projector IP address.
•For details about each setting, consult your network administrator.
Features Useful
-53