Using the “Options1” Menu

When System Lock is set

When System Lock is set, the keycode input screen appears after the power is turned on.

When it appears, enter the right keycode to start projection. Failure to enter the keycode will cause images not to be projected even when signals are entered to the projector.

▼Input screen for keycode

Note

•If no keycode is entered, the image will not be displayed, even if the projector receives the in- put signal.

wDirect Power On Function

Selectable items

Description

Enable

The projector automatically turns on

 

when the power cord is plugged into the

 

AC outlet or the breaker switch is

 

turned on.

Disable

The projector is turned on manually

 

(see page 30), and does not turn on

 

automatically when the power cord is

 

plugged into the AC outlet or the

 

breaker switch is turned on.

Menu operation Page 42

Locking the Operation Buttons onthe Projector (Keylock Function)Use this function to lock the operation buttons on the projector.■Locking the Operation Buttons

Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.

▼On-screen Display

Keylock function ON

•The keylock function does not affect the opera- tion with the remote control buttons.

•You cannot use the keylock function while the projector is warming up.

■Taking the Keylock Off

Hold down ENTER on the projector for about 5 seconds.

▼On-screen Display

Keylock function OFF

•When the projector is in standby mode, you can

release the keylock by holding down ENTER

and STANDBY/ON on the projector simul- taneously for about 5 seconds.

Info

•You can activate the keylock function only when no on-screen display is shown.

-50