Sharp XL-3000 Listening to the memorized station

01/1/17 XL-3000(U2)3.fm
24
Radio
- Listen ing to the memorize d station -
Listening to the memorized station
„Memorizing a station
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Note:
The backup function protects the memorized stati ons f or a f ew hours
should there be a power f ailure or the AC power cord disconnection.
„To recall a memorized station
„To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
„To clear a memorized station
1Perform the steps 1 - 3 in "Listening to the Radio" on
page 22.
2Press the MEMORY/SET
(MEMORY) button to enter the
preset tuning saving mode.
3Within 5 seconds, press the
PRESET ( or ) button to se-
lect the preset channel num-
ber.
Store the stations in memory, in order, starting with preset
channel 1.
4Within 5 seconds, press the
MEMORY/SET (MEMORY) but-
ton to store that station in
memory.
If the "MEMORY" and preset number indicators go out before
the station is memo rized, repeat the operation from step 2.
5Repeat ste ps 1 - 4 to se t ot her st ations , or to ch ange a
preset station.
When a new station is stored in memory, the station previously
memorized will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
Preset channel Frequency and frequency band
1Press the PRESET ( or ) button for more than 0.5
seconds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
2Press the PRESE T ( or ) button again when the de-
sired stati on i s locat ed.
1 Recall the memorized station.
2 While it is displayed, press the
MEMORY/SET (MEMORY) but-
ton.
3 Within 5 seconds, press the
CLEAR button on the remote con-
trol.
Listening to the Radio (See page 22.)