Sharp XL-E12H Listening to USB mass storage device/MP3 player, To play back USB/MP3 player

Listening to a CD or MP3/WMA disc (continued)

2 Press the PRESET ( or ) button to select the

desired folder, a then press the or button on the remote control to select the desired track.

Selected track number

3Press the MEMORY button to save the track number.

4Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed.

5Press the / button to start playback.

6During programmed playback, press the button to stop programmed playback.

Notes:

●When a disc is ejected, the programme is automatically cancelled.

●If you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will be cleared.

●During the programme operation, random play is not possible.

Listening to USB mass storage device/MP3 player

XL-E12

Note:

This USB mass storage device or MP3 player is not compatible with MTP and AAC file systems.

■To play back USB/MP3 player

1Press the FUNCTION button repeatedly to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed.

2Select desired file to be played back by pressing the

or button.

3Press the / button. Playback will start.

●Title, Artist and Album name are displayed if they are recorded in the USB memory device.

●Display content can be changed by pressing the (CLEAR)/DISP button.

Note:

To pause playback:

Press the / button.

The following functions are the same as CD operation: Page Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Note:

If USB memory device is not connected, “NO MEDIA” will be shown on the display.

■To remove USB memory device

1Press the button to stop playback.

2Press the button again and wait until “OK” is displayed.

3Disconnect USB memory device from the USB terminal.

Notes:

●SHARP will not be held liable for the loss of data whilst the USB memory device is connected to the audio system.

●Files compressed in MP3 and/or WMA format can be played back when connected to the USB terminal.

●This USB memory’s format supports FAT 16 or FAT 32.

●SHARP cannot guarantee that all USB memory devices will work on this audio system.

●USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system.

●This USB memory cannot be operated via USB hub.

●The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device.

●External HDD-storage cannot be played back via USB terminal.

●If the data inside the USB memory is large, it may take longer time for the data to be read.

E-7