Sharp XL-UH05H, XL-UH1H Maintenance, E-14, Troubleshooting chart continued, Condensation

Models: XL-UH05H XL-UH1H

1 16
Download 16 pages 55.9 Kb
Page 15
Image 15
Troubleshooting chart (continued)

Troubleshooting chart (continued)

USB

Symptom

 

 

Possible cause

 

 

 

 

Device

cannot

be

Is there any MP3/WMA file

detected.

 

available?

 

 

 

 

 

Is

the

device

properly

 

 

 

connected?

 

 

 

 

 

Is it an MTP device?

 

 

 

Does the device contain

 

 

 

AAC file only?

 

 

 

 

Playback does

not

Is it a copyright protected

start.

 

 

WMA file?

 

 

 

 

 

Is it a false MP3 file?

 

 

Wrong time display.

Is Variable Bitrate file

Wrong

file name

being played back?

display.

 

 

Is

the

File

Name written

 

 

 

in

Chinese

or

Japanese

 

 

 

characters?

 

 

 

 

 

 

 

 

 

 

Condensation

Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.

Before transporting the unit

Remove all CDs from the unit. Make sure there is no CD in the disc tray. Then, set the unit to the power stand-by mode. Carrying the unit with discs left inside can damage the unit.

If problem occurs

When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1Set the unit to the stand-by mode and turn the power on again.

2If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

Factory reset, clearing all memory

1Press the ON/STAND-BY button to enter the power stand-by mode.

2Press down the VOLUME + button and ■Condensation■Before transporting the unit button on main unit until “CLR ALL” appears.

Caution:

This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program.

Care of compact discs

Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player.

Do not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark this surface.

Keep your discs away from direct sunlight, heat, and excessive moisture.

Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.

NO

YES

 

Correct

Maintenance

Cleaning the cabinet

Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.

Caution:

Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet.

Do not apply oil to the inside of the unit. It may cause malfunctions.

E-14

Page 15
Image 15
Sharp XL-UH05H, XL-UH1H Maintenance, E-14, Troubleshooting chart continued, Condensation, Before transporting the unit