Listening to USB mass storage device/ MP3 player (continued)
Notes:
●This USB memory cannot be operated via USB hub.
●The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device.
●External
●If the data inside the USB memory is large, it may take longer time for the data to be read.
●The USB port is only intended for direct connection to a USB memory device without any cable.
●Playback order for MP3 files may differ depending on the writing software used during file download.
●Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps.
●Playlists are not supported on this unit.
●This unit can display File Name up to 16 characters.
●Folders with non playable files are also counted.
●The display playback time may not be displayed correctly when playing back a variable bitrate file.
●The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode.
●WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back.
The following functions are the same as CD | |
operation: |
|
| Page |
Direct track search | ........................................................5 |
Repeat play | 5 |
Random play | 5 |
Programmed play | 5 - 6 |
Note:
If USB memory device is not connected, “NO MEDIA” will be shown on the display.
Listening to the radio
■Tuning
1Press the
2Press the TUNER button on the remote control or FUNCTION button on the main unit repeatedly to select tuner function.
3Press the TUNING (
or 
) button to tune in to the desired station.
●Manual tuning:
Press the TUNING (
or 
) button repeatedly to tune in to the desired station.
●Auto tuning:
When the TUNING (
or 
) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
●When radio interference occurs, auto scan tuning may stop automatically at that point.
●Auto scan tuning will skip weak signal stations.
●When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Finally, the station name will appear.
●Full auto tuning can be achieved for RDS stations “ASPM”, see page 9.
To receive an FM stereo transmission:
●Press the TUNER button to select stereo mode and “ST” indicator will be displayed. “ 
” will appear when an FM broadcast is in stereo.
●If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer.
