Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal.

SPEAKERS

RATED SPEAKER IMPEDANCE:

6 OHMS MIN.

SPEAKERS

 

RIGHT

LEFT

AC INPUT

 

Red

Black

Caution:

Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit.

XL-UH242

Use

SPEAKERS

RATED SPEAKER IMPEDANCE:

6 OHMS MIN.

AC INPUT

RIGHT LEFT

ANTENNA

FM

GND AM

VIDEO/AUX IN

RIGHT LEFT

75 OHMS

SPEAKERST-UPLIGH

LEFT RIGHT

SUBWOOFER PRE-OUT

 

Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.

Do not let the bare speaker wires touch each other.

Do not allow any objects to fall into or to be placed in the bass reflex ducts.

SPEAKERS

 

IMPEDANCE:

RATED SPEAKER .

 

S MIN

6 OHM

RIGHT

LEFT

 

Preparation for

Note:

Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception.

Installing the AM loop antenna:

 

< Assembling >

< Attaching to the wall >

Do not stand or sit on the speakers. You may be injured.

Speaker grilles are removable

Make sure nothing comes into contact with the speaker diaphragm when you remove the speaker grilles.

Incorrect

Wall Screws (not supplied)

11