VIDEO/AUX IN jacks.
When using video equipment, connect the audio output to this unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the VIDEO/AUX/USB button.
4 Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the television.
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control.
Use a connection cord to connect the VCR, DVD, etc. to the
1
Listening to the playback sounds from VCR, DVD, etc.
Enhancing your system
The connection cord is not included. Purchase a commercially available cord as shown below.
VIDEO/AUX IN
RIGHT 
LEFT
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT LEFT
ANTENNA
FM | GND AM |
75 OHMS
VIDEO/AUX IN
RIGHT LEFT
LEFT RIGHT | |
SUBWOOFER |
|
Features
TUNER
CD (BAND)
Auto power on function:
When you press any of the following buttons, the unit turns on. VIDEO/AUX/USB button (main unit and remote control): The unit turns on and the "USB" or "AUX" function is activated.
/ 
button on the main unit: The unit turns on and playback of the last function starts (CD,TUNER,VIDEO/AUX/USB).
Advanced
33