1Press the ON/STAND-BY button to turn the power on.

2Press the CD button.

3Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1.

4Place the disc on the disc tray 1, label side up.

Be sure to place 3" (8 cm) disc in the middle of the disc trays.

5" (12 cm) 3" (8 cm)

5Press the OPEN/CLOSE button to close the disc tray 1.

 

 

 

 

 

 

 

MP3 indicator

[CD]

TOTAL indicator

[MP3/WMA]

WMA indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total number of

 

Total playing

Total number

 

 

tracks on the disc

time of the disc

of files

 

 

Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds).

6You can place discs on the trays 2 - 5 by following steps 3 - 5.

7Press the / button to start playback.

Disc play indicator

Playback will begin from track 1 on DISC 1. After that disc finishes playing, the next disc will automatically play.

After the last track on the fifth disc is played, the unit will stop automatically.

When there is no disc in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a disc.

To exchange other discs while playing a disc:

Press one of the 1 - 5 buttons for the stopped disc and within 5 seconds, press the OPEN/CLOSE button and exchange discs.

To remove the discs:

In the stop mode, press the 1 - 5 button and within 5 seconds, press the OPEN/CLOSE button.

To skip to a desired disc:

Press one of the 1 - 5 buttons and within 5 seconds, press the (CD ) button.

Caution:

Do not place two discs in a same tray.

Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions.

Do not push the disc tray while it is moving.

If the power fails while the tray is open, wait until the power is restored.

If the disc tray is stopped with force, "ER-CD20" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again.

If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.

If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.

XL-UH242

CD or MP3/WMA disc Playback

17