Advanced CD playback

XL-UH242

Programmed play

You can choose up to 32 selections for playback in the order you like.

1While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode.

2Press one of the 1 - 5 buttons

to select the desired disc.

Selected disc number

3Press the direct search buttons

on the remote control to select the desired track.

Selected track number

You can also select a track by pressing theorbutton.

4 Press the MEMORY button to save the track number.

5Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.

If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button.

6 Press the (CD ) button.

The total number in memory will appear.

7 Press the / button to start playback.

To clear the programmed selections: Press the CLEAR/DIMMER button on the remote control while the "MEMORY" indicator is flashing.

Each time the button is pressed, one track will be cleared, beginning with the last track programmed.

To cancel the programmed play mode:

While in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared.

Adding tracks to the program:

If a program has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track of the original program.

To check which tracks are programmed:

While the unit is stopped in the programmed play mode, press the orbutton.

Notes:

When a disc with programmed tracks is ejected, the program is automatically canceled.

Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will not be cleared.

During the program operation, random play is not possible.

CD or MP3/WMA disc Playback

21