3Select desired file to be played back by pressing the

or button. Proceed to step 5.

4Select desired file to be played back by pressing the

or button. (Folder mode off)

5Press the / (USB / ) button.

Playback will start and the file name will be displayed. Title, Artist & Album name are displayed if they are recorded in the USB memory device.

Display content can be changed by pressing the DISPLAY button.

File Name Display

 

 

 

 

TITLE-1 Indicator

Title Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(

1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TITLE-2 Indicator

Function Display

 

 

 

 

 

 

Artist Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

( 2)

 

 

 

 

 

 

 

 

 

 

 

(

1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TITLE-3 Indicator

Clock Display

 

 

 

 

 

 

Album Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

( 1) MP3 ID3-Tag only supports version 1.x. ( 2) Only appears when clock is already set.

Note:

To pause playback:

Press the CD/USB button.

Auto power off function:

In the stop mode of USB operation, the main unit enters the stand-by mode after 15 minutes of inactivity.

To remove USB memory device XL-UH242

1Press the USB button on remote control. Wait until "UNPLUG OK" appears on FL display.

2Disconnect USB memory device from the USB terminal.

 

Playback

Notes:

Memory

 

SHARP will not be held liable for the loss of data while the USB

 

memory device is connected to the audio system.

 

Files compressed in MP3 and / or WMA format can be played

USB

when connected to the USB terminal.

 

This USB memory’s format supports FAT16 or FAT32.

 

SHARP cannot guarantee that all USB memory devices will work on this audio system.

This USB memory cannot be operated via USB hub.

If "NO SUPPORT" is displayed, it means "Copyright protected WMA file" or "Not supported playback file" is selected.

In case the data inside the USB memory is large, it may take longer time for data to be read.

The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device.

25