Sherwood RD-6106 manual Adjusting the speaker settings, Checking the speaker setting, English

ENGLISH

	Adjusting the speaker settings		3			Select the desired speaker setting.
							SPEAKER
	Adjust the settings of front, center ,rear speakers and						MODE
	subwoofer connected.
	If the speaker setting is adjusted to “S”, the low range
	bass sound of the channel(s) is redirected to the
	subwoofer or the front channels and if the speaker		Each time this button is pressed, one of 11 different
	setting is adjusted to “N”, the sound of the channel(s)
			speaker settings is selected and displayed for 8
	is redirected to other channels.
			seconds as follows;
2		Press the SPEAKER MODE button for	FL		CS	RS, FL	CL	RS, FL	CL	RL,
		more than 2 seconds to enter the front-	FL		CL	RN, FL	CS	RL, FL	CN	RL,
		center-rear speaker mode.	FL		CS	RN, FL	CN	RS, FS	CS	RS,
		SPEAKER	FS		CS	RN and FS CN RS
		MODE	In the displays, F stands for Front, C for Center, R
			for Rear, L for Large, S for Small and N for None.
			When judging whether a speaker is Large or Small,
			please note that a standard large speaker has a cone
			size larger than 12 cm(5 inches).
	The front-center-rear speaker setting is displayed.		The following speaker settings cannot be selected.
	When the SPEAKER button is set to off, the 6 CH		Front :Small, Center : Large and Rear : Large(FS--
	DIRECT is selected as an input source or “ANALOG”		CL--RL) or Center : None and Rear : None(CN--
	is selected as signal input in the stereo mode, the		RN) setting.
	speaker mode function cannot be available.
4		Memorize the desired speaker setting	5			Select the desired subwoofer setting.
		while it is displayed.					SPEAKER
							MODE
		MEMO/ENTER
			Each time this button is pressed, the subwoofer
			setting changes and is displayed for 8 seconds as
			follows;
	The desired speaker setting is memorized and the
				SUB W(oofer) -- Y(es): When using a powered
	receiver enters the subwoofer mode.							subwoofer.
	If the speaker setting display disappears, start again			SUB W(oofer) -- N(o) : When not using a
	from step 2 above.							powered subwoofer.
			If the front speaker is set to “S”, the subwoofer is
			automatically set to “Y”.
		Memorize the subwoofer setting while it is
6			Checking the speaker setting
		displayed.
							SPEAKER
		MEMO/ENTER					MODE

	Each time this button is pressed briefly, the front-
If the subwoofer setting display disappears, start	center-rear speaker or subwoofer setting is
again from step 2 above.	displayed.

16