ENGLISH
Start recording on the VIDEO 1.
3
Start play on the VIDEO 2 and the CD
4 respectively.
The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers.
Note : Be sure to observe the order of the above steps 1 and 2.
OTHER FUNCTIONS
Compressing the dynamic range (Dolby Digital mode only)
This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track(with extremely high volume) to minimize the difference in volume between the specified and
This makes it easy to hear all of the sound track when watching movies at night at low levels.
DYNAMIC
RANGE
Each time this button is pressed, the mode changes and disappears in 3 seconds as follows:
DYNAmic 0.0 : Off
DYNAmic 0.5 : Low compression
DYNAmic 1.0 : High compression
In some Dolby Digital software, this function may not be available.
Operating the sleep timer
The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
To set the receiver to automatically turn off after the specified period of time.
SLEEP
Each time this button is pressed, the sleep time changes and disappears in 3 seconds as follows;
10 20 30 60 90 OFF Unit : minutes
While operating the sleep timer, “SLEEP” lights up. When the sleep time is selected, all display panels of Sherwood components connected by the DIGI LINK III are dimly lit.
Adjusting the brightness of the fluorescent displays
DISPLAY
SYS
Each time this button is pressed, the brightness of all fluorescent displays of Sherwood components connected by the DIGI LINK III changes together as follows;
ON dim OFF 
In the display OFF mode, pressing any button will restore the display ON mode.
22
