Sherwood RD-6108 manual Recording with Tape Monitor, Dubbing from video components onto

RECORDING

The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital input can be heard but cannot be recorded.

The volume and tone (bass, treble) settings have no effect on the recording signals.

Recording with TAPE MONITOR			Start recording on the TAPE MONITOR.
1	Select the desired input as a recording		2
	source except for TAPE MONITOR.
		VIDEO1
AUDIO	VIDEO	VIDEO2	Start play on the desired input.
		VIDEO3	3
	or	CD
		TUNER
		AUX
			For tape monitor function, refer to “TAPE
Be sure that “TAPE M” goes off.			MONITOR function” on page 10.
Dubbing from video components onto			Start recording on the VIDEO 1.
			2
VIDEO 1
1	Select VIDEO 2 or VIDEO 3 as a recording
	source.
	VIDEO	VIDEO2	Start play on the VIDEO 2 or the VIDEO 3.
	or	VIDEO3	3
			The audio and video signals from the VIDEO 2 or the
			VIDEO 3 will be dubbed onto the VIDEO 1 and you
			can enjoy them on the TV set and from the speakers.
Dubbing the audio and video signals			Select CD as an audio recording source.
separately onto VIDEO 1			2
Example) When dubbing the VIDEO 2 video signal
and the CD audio signal separately onto
VIDEO 1.			AUDIO
			CD

Select VIDEO 2 as a video recording source.

1	or
	VIDEO2
	VIDEO
	or

21

ENGLISH