Sherwood RVD-6090R Adjusting the speaker settings, Checking the speaker setting, Rs, Fl

	Adjusting the speaker settings		3			Select the desired speaker setting.
								SPEAKER MODE
	Adjusting the settings of front, center ,rear speakers,
	and subwoofer connected.
	If the speaker setting is adjusted to “S”, the low range
	bass sound of the channel(s) is redirected to the
	subwoofer or the front channels and if the speaker		Each time this button is pressed, one of 11 different
	setting is adjusted to “N”, the sound of the channel(s)
			speaker settings are selected and displayed for 8
	is redirected to other channels.
			seconds as follows;
2		Press the SPEAKER MODE button for	FL		CS		RS, FL	CL	RS, FL	CL	RL,
		more than 2 seconds to enter the front-	FL		CL		RN, FL	CS	RL, FL	CN	RL,
		center-rear speaker mode.	FL		CS		RN, FL	CN	RS, FS	CS	RS,
		SPEAKER MODE	FS		CS		RN and FS CN RS
			In the displays, F stands for Front, C for Center, R
			for Rear, L for Large, S for Small and N for None.
			When judging whether a speaker is Large or Small,
			please note that a standard large speaker has a cone
	The front-center-rear speaker setting is displayed.		size larger than 12 cm(5 inches).
			The following speaker settings cannot be selected.
	When the 6 CH DIRECT is selected as input source or
			Front :Small, Center : Large and Rear : Large(FS--
	“ANALOG” is selected as signal input in the stereo		CL--RL) or Center : None and Rear : None(CN--
	mode, the speaker mode function is not available.		RN) setting.
4		Memorize the desired speaker setting	5			Select the desired subwoofer setting.
		while it is displayed.						SPEAKER MODE
		MEMO/ENTER
			Each time this button is pressed, the subwoofer
			setting changes and is displayed for 8 seconds as
			follows;
	The desired speaker setting is memorized and then
				SUB W(oofer) -- Y(es): When using a subwoofer.
	it enters the subwoofer mode.
	If the speaker setting display disappears, start from			SUB W(oofer) -- N(o) : When not using a
	step 2 above, again.
									subwoofer.
			In case that the front speaker is set to “S”, the
			subwoofer is automatically set to “Y”.
6		Memorize the subwoofer setting while it is
			Checking the speaker setting
		displayed.MEMO/ENTER
								SPEAKER MODE

	Each time this button is pressed briefly, the front-
If the subwoofer setting display disappears, start	center-rear speaker or subwoofer setting is
from step 2 above, again.	displayed.

ENGLISH

15