Sherwood RVD-6090R Adjusting each channel level, Dolby Digital AC-3 or Dolby Pro

ENGLISH

Adjusting each channel level			8	Adjust the level of the selected
				channel as desired.
Select the desired channel.
7				CHANNEL LEVEL
CHANNEL SELECTOR
				or
	or			CH LEVEL
		CH SEL.
Each time this button is pressed, the corresponding			If the channel display disappears, start from the
			above step 7 again.
channel is selected and displayed for 3 seconds as
follows;
Front Left	Center	Front Right
SubWoofer	Rear Left	Rear Right	9	Repeat the above steps 7 and 8 to
When in the normal stereo mode or when a speaker				adjust other channel levels.
setting is “N”, the center, rear or subwoofer are not
available.

In Dolby Digital (AC-3) or Dolby Pro	11	Do the steps 7 to 9 in “Adjusting each
		channel level” until the sound level of each
		speaker is heard to be equally loud.

In these modes, the volume level of each channel can be adjusted easily with the test tone function.

Enter the test tone mode.

10

Cancel the test tone function.

T.TONE 12

The test tone will be heard from the speaker of each
channel for 2 seconds as follows;
	Front Left	Center	Front Right	T.TONE
	SUBwoofer	Rear Left	Rear Right

When the speaker setting is “N”, the test tone of the corresponding channel is not available.

16