Sherwood V-903 manual Continued, When selecting the PICTURE MODE, English

Continued

When selecting the PICTURE MODE

•There are two types of source content in pictures recorded in DVD Videos : film content(pictures recorded from films at 24 frames per second) and video content(video signals recorded at 30 frames per second).

According to the type of content being played back, select the desired picture mode.

ENGLISH

-- VIDEO PAGE --

TV ASPECT
SCART VIDEO
PIC MODE	AUTO
	HI-RES
MAIN PAGE	N-FLICKER

•AUTO : Select this mode normally. This unit automatically detects source content, film or video, of playback source, and perform the necessary signal process.

•HIGH RESOLUTION : To get better picture resolution, select this mode.

•NO FLICKER : To improve flicker of picture, select this mode.

This mode is suitable for playback of video content pictures.

Note:

•When there is no improvement of picture quality in the HIGH RESOLUTION mode or NO FLICKER mode, we recommend you to select the AUTO mode.

2	Press the CURSOR	button to select the setting menu.
		RC

• Each time the CURSOR or button is pressed, the setting menu or the item menu is selected.

3	Press the CURSOR /	buttons to select the preferred, then press the ENTER button.
	RC	RC

ENTER

• The selected setting is colored.

4	Press the CURSOR	button to select the item menu.
		RC

• Each time the CURSOR or button is pressed, the item menu or the setting menu is selected.

5 Set other setups to your preference.

To return to the main setup menu screen

• Press the CURSOR button to select the item menu, press the CURSOR / buttons to select “MAIN PAGE” and press the ENTER button.

Then the main setup menu screen will be displayed.

•When the RETURN button is pressed repeatedly, the main setup menu screen will be displayed, and then the setup mode is canceled.

32