Sherwood V-903 manual Setting The Audio Setup, English, When selecting the AUDIO OUT

SETTING THE AUDIO SETUP

	-- AUDIO PAGE --			• AUDIO OUT : When outputting either analog audio signal or a preferred
				digital audio signal format.
ENGLISH
	AUDIO OUT	ANALOG		• DOWNMIX : When outputting a preferred analog audio signal format.
	DOWNMIX	SPDIF/STREAM		• AUDIO DRC(Dynamic Range Compression) : When turning on or off the
				dynamic range compression that makes faint sound easier to hear at low volume
	AUDIO DRC	SPDIF/PCM
				levels.
	MAIN PAGE
	Item menu		Setting menu

1	Press the CURSOR / buttons to select the preferred item.
	RC

• Then the setting menu of the selected item is displayed.

When selecting the AUDIO OUT

Notes :

•This unit can output either analog audio signal or digital audio signal(, not both analog and digital audio signals concurrently). Therefore, you should set the AUDIO OUT to either ANALOG or coressponding digital out setting(SPDIF/STREAM or SPDIF/PCM) according to system connections, etc.

•When the DIGITAL OUT of the unit is connected to the DIGITAL IN of an amplifier which does not contain the Dolby Digital or DTS decoder(which processes the bitstream signal), you should set the AUDIO OUT to SPDIF/PCM to convert Dolby Digital or DTS bitstream to linear PCM(2 channel) of 48 kHz/16 bit and to output it.

•If the AUDIO OUT is not set correctly, loud noise or no sound may be heard from the speakers, and it may be harmful to your ears and damage the speakers.

-- AUDIO PAGE --

AUDIO OUT	ANALOG
DOWNMIX	SPDIF/STREAM
AUDIO DRC	SPDIF/PCM

•ANALOG : When outputting analog audio signal.

•SPDIF/STREAM : When outputting the digital audio signal as it was recorded.

•SPDIF/PCM : When converting DTS or Dolby Digital bitstream to linear PCM(2 channel) of 48 kHz/16 bit and outputting it.

When selecting the DOWNMIX

•Depending on whether the AUDIO OUTs(or the A/V SCART OUTPUT connector) are connected to a stereo amplifier/receiver/TV or a A/V amplifier/receiver with built-in surround decoder, you should set the DOWNMIX correctly.

Notes :

•This setting is valid when the AUDIO OUT is set to ANALOG.

•The DOWNMIX setting affect only the output signal from the AUDIO OUT jacks(or the A/V SCART OUTPUT connector) when playing back a DVD Video disc, etc. recorded in multi-channel signal format.

-- AUDIO PAGE --

AUDIO OUT
DOWNMIX	LT/RT
AUDIO DRC	LO/RO

•LT/RT : When you enjoy multi-channel surround sound by connecting the unit's AUDIO OUTs to a A/V amplifier/receiver with built-in surround decoder.

•LO/RO : When you enjoy conventional 2-channel stereo sound by connecting the unit's AUDIO OUTs to a stereo amplifier/receiver/TV.

33