CONNECTING TO TV WITH AUDIO AND VIDEO INS
•You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the AUDIO OUTs to the AUDIO INs of DVD(, AUX, CD, etc.) of your amplifier or receiver.
•To connect these jacks correctly, refer to “Connecting AUDIO OUTs” and “Connecting VIDEO OUTs” on the previous page.
Notes:
•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cord which converts stereo audio output to monaural.
•Do not connect the VIDEO OUTs of the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy protection function.
ENGLISH
Amplifier or Receiver
AUDIO R
IN L
TV
AUDIO R
IN L
(COMPOSITE)
VIDEO IN IN VIDEO IN
CR CB Y
This unit
AUDIO
OUTVIDEO OUT
CR | CB | Y |
| COMPONENT OUT | |
|
| OUT |
CONNECTING TO TV WITH SCART CONNECTOR(Regional Option)
•For some countries like Europe, the unit incorporates the A/V SCART OUTPUT connector.
•You can connect the unit to TV easily using the SCART connections without other cumbersome audio and video connections.
•During operation of the unit, this connector can deliver either the composite(regular) video or the
•To obtain the highest picture quality, you can make the COMPONENT VIDEO connections between the unit and TV.
•Depending on the video signal(s) to be used, adjust the SCART VIDEO setting to your preference and set your TV to the corresponding one to match the selected settings of the unit.
(Refer to “When selecting the SCART VIDEO(Regional Option)” on page 31 and the operating instructions of the component(s) connected.)
•To listen to analog audio signal that is outputting from this connector, you should set the AUDIO OUT and DOWNMIX correctly.(Refer to “SETTING THE AUDIO SETUP” on page 33.)
Note:
•In this connection, do not connect the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy protection function.
TV |
|
| This unit | |||
|
|
|
| A/V SCART OUTPUT |
|
|
|
|
|
|
|
SCART IN
8