ENGLISH

Troubleshooting Guide

If a fault occurs, run through the table below before taking your receiver for repair.

If the fault persists, attempt to solve it by switching the unit off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you repair the unit yourself as this will invalidate the guarantee!

 

 

 

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

No power

• The AC input cord is disconnected.

• Connect cord securely.

 

• Poor connection at AC wall outlet or the outlet

• Check the outlet using a lamp or another

 

is inactive.

appliance.

 

 

 

No playback

• The disc is loaded upside down.

• Reload the disc with the printed side up.

 

• The disc is not playable.

• Use a playable disc.

 

• The disc is dirty.

• Clean the disc.

 

• The rating level is not set correctly.

• Set the rating level setting correctly.

 

 

(Refer to “When selecting the RATING LEVEL” on

 

 

page 36.)

 

• The symbol about invalid operation is displayed.

• Adjust the setting correctly.

 

 

(Refer to “SYMBOL ABOUT INVALID OPERATION”

 

 

on page 12.)

 

 

 

Malfunction

• The disc is scratched or dirty badly.

• Press the POWER ON/OFF switch to switch the

 

 

power off, press the POWER ON/OFF switch

 

 

again and then unload the disc.

 

 

 

No picture

• The video cords are disconnected.

• Connect the cords correctly.

 

• The incorrect selection of input source on the

• Select the input source correctly.

 

TV.

 

 

• The disc is not playable.

• Use a playable disc.

 

 

 

Noisy or distorted

• The unit is connected to a VCR directly and the

• Connect the unit so that the picture signal is

picture

copyguard function is activated.

transferred directly to the TV.

 

• The disc is dirty.

• Clean the disc.

 

• It is in rapid advance or reverse playback, or in

• Sometimes a small amount of picture distortion

 

frame advance or reverse playback.

may appear. This is not malfunction.

 

 

 

Abnormal picture or

• The component video output signal is not

• Select the component video output signal

no picture

selected correctly.

correctly.

 

 

(Refer to “CHANGING THE COMPONENT

 

 

VIDEO OUTPUT SIGNAL” on page 26.)

 

 

 

Slight pause of

• The layer transition occurs during playback of

• Sometimes slight pause may occur.

picture

DVD Videos recoded in dual-layer format.

This is not malfunction.

 

 

 

 

• The audio cords are disconnected.

• Connect the cords correctly.

No sound

• The speakers are disconnected to the amplifier.

• Connect the speakers correctly.

 

• The incorrect selection of input source on the

• Select the input source correctly.

 

amplifier.

 

 

• The DIGITAL OUT is not set correctly.

• Set the DIGITAL OUT correctly.

 

 

(Refer to “SETTING THE AUDIO SETUP” on

 

 

page 33.)

 

 

 

Noisy or distorted

• The disc is dirty.

• Clean the disc.

sound

• Poor connections.

• Check the connections and connect all cords

 

 

securely.

 

 

 

Remote control unit

• Batteries are not loaded or exhausted.

• Replace the batteries.

does not operate.

• The remote sensor is obstructed.

• Remove the obstacle.

 

 

 

43

Page 43
Image 43
Sherwood V-903 manual Troubleshooting Guide, Problem Possible Cause Remedy

V-903 specifications

The Sherwood V-903 is a remarkable addition to the world of audio receivers, known for its powerful performance and advanced features. Designed for enthusiasts who demand high-quality sound, it combines cutting-edge technologies with ease of use, making it a standout choice for any home theater setup.

One of the key features of the Sherwood V-903 is its robust amplification system. With a power output of 100 watts per channel, it delivers clear and dynamic audio across all frequencies. This strength allows the receiver to drive a variety of speaker types, from compact bookshelf models to larger floor-standing speakers, ensuring that listeners experience every note with precision and clarity.

The V-903 comes equipped with Dolby Digital and DTS decoding, providing an immersive surround sound experience. This is particularly beneficial for movie lovers, as it captures the subtle nuances in film soundtracks, making viewers feel as though they are part of the action. Additionally, the receiver supports various audio formats, including MP3, WMA, and FLAC, allowing users to play their favorite music without compromise.

Connectivity is another strong point of the Sherwood V-903. It features several HDMI inputs, enabling seamless integration with modern devices like Blu-ray players and gaming consoles. The receiver also offers optical and coaxial digital inputs, as well as traditional analog connections, ensuring compatibility with a wide range of audio sources. Moreover, users can enjoy wireless streaming capabilities through Bluetooth, allowing for easy pairing with smartphones and tablets.

The user interface of the V-903 is designed with convenience in mind. It includes a clear and intuitive display, along with a remote control that provides access to all functions without the need to navigate complex menus. This makes adjusting settings or switching inputs quick and straightforward. The device also features customizable equalizer settings, empowering users to tailor the audio output to their personal preferences.

In terms of design, the Sherwood V-903 boasts a sleek aesthetic with a modern finish, making it a stylish addition to any entertainment center. Its compact build does not sacrifice performance, allowing audiophiles to maximize their space without compromising on sound quality.

Overall, the Sherwood V-903 is an impressive audio receiver that appeals to both casual listeners and serious audiophiles. With its powerful audio performance, extensive connectivity options, and user-friendly design, it stands out as a reliable choice for those looking to enhance their home audio experience.