Shindaiwa 68006-94310 manual

SHINDAIWA OWNER’S AND

OPERATOR’S MANUAL

EC7500/EC7600

ENGINE CUTOFF SAW

WARNING!

 Read this manual and familiarize yourself with its contents.

 This unit is designed primarily for cutting construction materials and metal ac-

cording to the type of cutting wheel installed.

To minimize the risk of injury to yourself and others, always wear hearing pro-

tection, a dustproof mask, goggles and a helmet when operating this unit.

Keep this manual handy so you can refer to it when required.

Part Number 68006-94310 Rev. 12/04

Contents

Main Contents Attention Statements Labels and Symbols Before Operation Safety Precautions WARNING! Page Page Page Safety and Operation Information Labels O Unit Description Technical Specications Assembly Mounting the Cut-off Wheel Prior to Assembly Filling the Fuel Tank Starting the Engine When the Engine is Cold If the engine still does not start, Starting a Warm Engine If the Engine Doesnt Start Stopping the Engine Wet or Dry Operation Adjusting Wheel Guard Angle Operation Cutting Reversing cutting head for ush cutting operations Inspection and Maintenance Inspection and Maintenance Requirements Reversing cutting head for ush cutting operations(cont.) Cleaning the Air Cleaner Reversing cutting head for ush cutting operations(cont.) Adjusting the Carburetor Adjusting Idle Speed High and Low Speed Needle Spark Plug Maintenance Cleaning Cylinder Fins Checking the Drive Belt Adjusting Belt Tension Replacing the Drive Belt Checking the Cut-off Wheel Replacing the Cut-off Wheel Sharpening a Diamond Cut-off Wheel Checking the Fuel Filter WARNING! Lubricating the Clutch Bearing Long Term Storage Troubleshooting The engine does not start. PROBLEM Cutting performance is poor. Remove the spark plug (pg 13). DECLARATION OF CONFORMITY Declaration of Conformity Shindaiwa Kogyo Co., Ltd. Shindaiwa Kogyo Co., Ltd.