Troubleshooting
PROBLEM
The engine does not start.
Make sure the fuel tank contains with clean, fresh fuel (pg 11).
Remove the spark plug (pg 13).
PROBLEM
Cutting performance is poor.
Make sure the choke is � pushed fully in.
Make sure the air � cleaner is clean (pg 17).
Is the spark � plug wet?
Dry the � spark plug.
Inspect the spark plug � (pg 19).
Pull the recoil starter several times to remove fuel from the cylinder.
Is the spark � plug dry?
Replace the �
fuel filter � (pg 22).
Make sure the
appropriate for your work.
Make sure the diamond � wheel is sharp.
Make sure the drive belt is � properly tightened (pg 19).
Make sure the carburetor is � is properly adjusted (pg 18).
If the above inspections and maintenance procedures do not � correct the problem, contact your Shindaiwa dealer for assistance.
24
