Shindaiwa 68006-94310 O

EC7500.1

No performance guarantee without �

using genuine Shindaiwa blades�

No-load revolution speed: 4180 min

-1

(rpm)�

Use reinforced abrasive blades with �

maximum useable perimeter velocity of: �

15,749 ft/min.(4800 m/min.)

USE ONLY GENUINE �

SHINDAIWA BLADES

EC7500

Max. blade diameter: 12" (305mm)�

Max. blade thickness: 0.157" (4.0mm)�

Standard arbor: 0.86" (22mm),�

others available; see owner’s manual

EC7500.18

DECOMPRESSION�

VALVE

PRIMER

�

IMPORTANT!

Make sure all safety and operation

information labels are undamaged

and readable. Immediately replace

damaged or missing safety and

operation information labels, which

are available from your authorized

Shindaiwa dealer.

Figure 4

BELT

DIRECTION

EC7500 EC7600

Contents

Main Contents Attention Statements Labels and Symbols Before Operation Safety Precautions WARNING! Page Page Page Safety and Operation Information Labels O Unit Description Technical Specications Assembly Mounting the Cut-off Wheel Prior to Assembly Filling the Fuel Tank Starting the Engine When the Engine is Cold If the engine still does not start, Starting a Warm Engine If the Engine Doesnt Start Stopping the Engine Wet or Dry Operation Adjusting Wheel Guard Angle Operation Cutting Reversing cutting head for ush cutting operations Inspection and Maintenance Inspection and Maintenance Requirements Reversing cutting head for ush cutting operations(cont.) Cleaning the Air Cleaner Reversing cutting head for ush cutting operations(cont.) Adjusting the Carburetor Adjusting Idle Speed High and Low Speed Needle Spark Plug Maintenance Cleaning Cylinder Fins Checking the Drive Belt Adjusting Belt Tension Replacing the Drive Belt Checking the Cut-off Wheel Replacing the Cut-off Wheel Sharpening a Diamond Cut-off Wheel Checking the Fuel Filter WARNING! Lubricating the Clutch Bearing Long Term Storage Troubleshooting The engine does not start. PROBLEM Cutting performance is poor. Remove the spark plug (pg 13). DECLARATION OF CONFORMITY Declaration of Conformity Shindaiwa Kogyo Co., Ltd. Shindaiwa Kogyo Co., Ltd.