5
PowerPath Administration on Solaris
7.Run the sol9_liveup.sh script and then activate the inactive boot environment:
a.Mount the root of the inactive boot environment to a directory such as /mnt.
b.Run the script sol9_liveup.sh. Enter:
cd /install_dir/EMCpower/scripts
./sol9_liveup.sh /mnt
where install_dir is the base install location of the EMCpower package. For example, if the base install directory is opt, enter:
cd /opt/EMCpower/scripts
./sol9_liveup.sh /mnt
c.Continue with the procedure documented in the Solaris 9 Installation Guide.
Troubleshooting
If Solaris Live Upgrade replaces the sd.conf file with a default sd.conf, the new boot image may not work. In this case, replace the default sd.conf with either the file Solaris Live Upgrade automatically saved in /kernel/drv/sd.conf.~version or the file you saved before starting the upgrade procedure. (See step 3, above.)
If you fail to run sol9_liveup.sh before activating Solaris 9, the new boot image will not work. In this case:
1.Boot from the older Solaris boot area.
2.Mount the Solaris 9 boot area.
3.Run sol9_liveup.sh in the Solaris 9 boot area.
4.Boot Solaris 9.
PowerPath for UNIX Installation and Administration Guide | |
|
|
