EMC 300-000-978 REV A03 manual Manager VCS Agent

Installing PowerPath

11.The screen displays information about the installation, ending with:

----------------------------------------------------

*EMCpower installation:

*Installation is successful.

*If you have a license key card, register now. Then

*REBOOT the host to complete the remaining steps of the

*installation. Refer to the PowerPath for UNIX

*Installation and Administration Guide for more

*information.

------------------------------------------------------

Installation of <EMCpower> was successful.

The following packages are available:

1	EMCpower	EMC	PowerPath
		(all) 4.0.0_bxxx
2	EMCvg	EMC	Enterprise Cluster PowerPath Volume
		Manager VCS Agent

(sparc) 1.0

Select package(s) you wish to process (or 'all' to process all packages). (default: all) [?,??,q]:

•If you are installing PowerPath for a VCS cluster and you want to install the PowerPath Volume Manager VCS Agent now, enter 2 and press ENTER. Continue with Install the VCS Agent Software, step 5, on page 1-22.

•Otherwise, enter q and press ENTER.

PowerPath is now installed on the host. You must register PowerPath, reboot the host, and perform other administrative tasks before PowerPath can run on the host. Refer to After You Install on page 1-16 for postinstallation information and procedures.

Installing PowerPath 4.0 1-9

1